Page 1 of 1

85% Bridi UFO

Posted: Thu 11. Apr 2019, 14:38
by SLabuta
My 85% Bridi UFO. Created the wings, wing tips, rudder, elevator and their tips in WingHelper 1.5 Took advantage of most of the new features, like 1/2 ribs, "K" aileron cutter, the new leading edge cutting options... Basically the shape from the Bridi plans with my structure design. Now electric and a taildragger. 4S Lipo setup at about 750 watts peak. AUW is about 4.5 lbs (2 kg). Wing span is 55 in (140 cm)

The design was sent out to be laser cut. I built it over a printout of the PDF output. Everything fit well and matched the printed plans. Perfect!
HalfWing.jpg
HalfWing.jpg (131.61 KiB) Viewed 551 times
See the link below for some detailed pictures.

https://flic.kr/s/aHskRHhWUS

Steve Labuta

Re: 85% Bridi UFO

Posted: Sat 13. Apr 2019, 09:05
by alex.pozgaj
Looks great Steve! :)

Best regards,

alex.